All DosiPump DP1000 models are now supplied in fully welded stainless steel housings. The pump is splash water resistant (IP64 standard) and therefore easy to clean and optimal for media kitchens.

8 different tube calibrations allow a fast start of any operation;
[select tube] [select program] [start]

Easier programming than ever! It's like defining values for each individual Dose in a simple excel spread sheet. "Define the parameters for each dose freely and select the number of repeat doses or dosing rows desired". Programming done!

Combined with its unique Double pump system with 10 Rolls, it offers the lowest pulsation of any peristaltic pump available. DosiPump "fast" version for true Pump speeds of up to 2400ml/min available!

For simple repetitive dosing's, BioTool's range of pumps includes the most simple to program laboratory pump, the DP500. The first dose gets memorized by the push of the Memory button. The pump will repeat the previous dose by every further start signal from the footswitch or start button.

No tube calibration required! It's just a sample & repeat operation to simplify repetitive dosing's above typical pipette volumes.

The pump housing is designed to hold either square or round shape 1l lab bottles and makes a ready to go dilutor / dispenser station.

For further information visit www.biotoolswiss.com