Micronic is excited to expand its Eco-Friendly Choice product line with the introduction of the EFC Refill Rack, a product designed with sustainability at its core. The first-of-its-kind EFC Refill Rack comprises a reusable base rack and cover, and a refill system made of 99% in-house renewed materials, highlighting Micronic’s commitment to both environmental responsibility and superior functionality...
Micronic, leader in developing cutting-edge sample storage solutions, proudly unveils its latest innovation: an Eco-Friendly Rack Range. These Eco-Friendly Choice (EFC) Racks are made of 99% in-house renewed material (RM), setting a new sustainable standard for sample storage racks. The racks are an ideal solution for laboratories committed to embracing a greener future...
Micronic launches its first high speed camera-based rack reader, for fast and precise rack reading: the Micronic Rack Reader DR900, complete with the intuitive Micronic Code Reader Software. Optimized for rapid and accurate sample identification, the DR900 high speed reader can read and decode a whole rack of 2D Data-Matrix codes in just 3 seconds. The new DR900 is compatible with most brands of 2D Data-Matrix coded tubes whether they are in a 139-, 96-, 48-, or 24-well format...
Micronic launches a new addition to its comprehensive automatic recapping equipment range to accelerate sample storage workflows: the Screw Cap Recapper CS700 with Extended Height. The extended height of the CS700 gives researchers now the ability to automatically cap, decap and recap tubes in 96-well format up to 2.00ml. Designed to improve efficiency, the Micronic Screw Cap Recapper can be used as a stand-alone instrument or be simply integrated into a fully automated laboratory environment...
Micronic launches a complete line of automation friendly Screw Cap Carriers. The Cap Carriers are fully compatible with the automated Screw Cap Capping and Decapping equipment offered by Micronic. Based on the Society for Laboratory Automation and Screening (ANSI/SLAS) standards, the Screw Cap Carriers accommodate 96-, 48-, and 24-well format Screw Caps. The Disposable Cap Carriers are compatible with all Micronic Screw Caps for both internally and externally threaded tubes...
Targeting the ever-growing requirement for higher sample throughput the robust Push Cap Decapper CP620 from Micronic enables labs tasked with opening multiple sample storage tubes with TPE Septum Caps to achieve significant productivity gains. The Push Cap Decapper CP620 is not only compatible with Micronic tubes (up to 1.40ml) and TPE Septum Caps but also with tubes and caps of other brands...
The Micronic 0.80ml Tube with External Thread provides research labs the best volume to height ratio compared to similar sample storage tubes in the market. With its mere 38.3mm height the 0.80ml tube offers 0.75ml working volume at ambient temperature. The temperature storage range of the 0.80ml biobanking tube varies from vapor phase LN2 up to +100?C which makes the tube fit various laboratory needs...
Micronic, leader in innovative sample storage and automation solutions launches the Micronic Tube Reader DT510. The Micronic DT510 is high-speed storage tube code reading at its best. Attractively designed to enhance your lab space – the Micronic DT510 is truly versatile - it reads 1D rack barcodes, 1D barcoded tubes and 2D Data-Matrix coded tubes (in 96-, 48- and 24-well formats) all in less than a second...
Micronic, leader in innovative sample storage and automation solutions, adds an additional 2D Data-Matrix code on the bottom of the 96-1, 96-Q1, 96-2, 96-3 and 96-4 Micronic ULT Racks. With this additional 2D code, the Micronic ULT Racks are now provided with five different codings. The rack features a cover print indicating the rack and tube type, a unique laser-etched alphanumeric coding on top of the rack, a 1D barcode and human readable code on the side of the rack and a 2D Data-Matrix code on the bottom of the rack....
Micronic, leader in innovative sample storage and automation solutions, launches the new 138-2 High Density (HD) Rack. The Micronic 138-2 HD storage rack accommodates 138 individual 0.75ml internally threaded or externally threaded (hybrid) tubes or 0.80ml externally threaded tubes in an automation compatible ANSI/SLAS dimensional footprint....
Micronic is pleased to announce the release of the new Rack Reader DR710, complete with the intuitive Micronic Code Reader Software. The DR710 is equipped with a deep focus image sensor ensuring the highest accuracy 2D code reading even if the tubes aren't flush with the scanner plate or codes are partially compromised. By activating the uniquely designed active anti-frost system on the DR710, ambient air is drawn into the scanner where it is cleaned of dust....
Micronic, leader in innovative sample storage and automation solutions, launches a new Screw Cap for Tubes with External Thread. The Screw Cap IG has an improved gripping for both manually and automated handling, the newly designed lead-in on top of the Screw Cap ensures a better tube placement and the optimized cap height (5.8mm) makes storage in automated stores more efficient...
Anticipating on the increasing demand for externally threaded tubes, Micronic launches the 1.10ml Tubes with External Thread. The 1.10ml tube with external thread capped with a screw cap has the same height as a Micronic 1.40ml tube with internal thread capped with a push cap, making it the ideal tube for users that want to switch to an externally threaded screw cap tube....
Micronic launches an optional Docking Station for its CS500, CS510 and CS520 Screw Cap Recappers. Using the Docking Station in combination with the Screw Cap Recappers, a consistent capping and decapping action is assured, allowing research laboratories to recap 96-well, 48-well and 24-well format sample storage tubes securely and uniformly for an optimal sealing performance...
Micronic, leader in innovative sample storage and automation solutions, launches the Tube Handler HT500. The HT500 is an efficient and effective answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes....
With an extensive range of versatile Screw Cap Recappers, Micronic increases the efficiency of the sample storage or testing process by accelerating the capping and decapping of screw cap tubes. Micronic offers two product lines, the Screw Cap Recapper CS500 series and the Screw Cap Recapper CS700 series. The recappers are compatible with either 96-well, 48-well or 24-well format sample storage tubes...
Manufactured from highest medical grade polypropylene, Micronic 1.40ml round bottom tubes are proven to be an industry standard solution for many laboratory processes. The tubes provide an affordable way to improve sample storage, handling, screening and logistics. Many laboratories use the 1.40ml tubes for short-term storage or intermediate processes such as sample analysis or homogenization of samples using beads....
Targeting the ever-growing requirement for higher sample throughput the robust Push Cap Decapper CP620 from Micronic enables labs tasked with opening multiple sample storage tubes to achieve significant productivity gains. The Push Cap Decapper CP620 is the latest addition to Micronic’s line of productive sample handling equipment, that is not only compatible with all Micronic tubes (up to 1.40ml) but also with tubes and caps of other brands....
Micronic, leader in innovative sample storage and automation solutions, is proud to announce the release of the new 0.30ml, 0.75ml and 1.40ml Non-coded Tubes with External Thread in 96-well format. These tube sizes are unique in the market! The Micronic Non-coded Tubes provide an affordable way to improve sample preparation, processing, screening and logistics....
Micronic, leader in innovative sample storage and automation solutions, offers the new Micronic TPE Capcluster-96 and Capmat-96 for externally threaded tubes. These sealing solutions complement the comprehensive line of the Micronic External Thread (Hybrid) tubes. The TPE caps offer reliable options for maintaining the integrity of tube contents at temperature down to -80°C, allowing to store samples confidently....
Micronic, leader in innovative sample storage and automation solutions, launches the state-of-the-art Micronic Tube Handler HT700. The HT700 is a brisk and an advanced answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes at room temperature....
Micronic, leader in innovative sample storage and automation solutions, launches the state-of-the-art Micronic Tube Handler HT700. The HT700 is a brisk and an advanced answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes at room temperature....
Micronic has launched the Rack Reader DR700 complete with in-house designed Micronic Code Reader Software and an optional Side Barcode Reader. The DR700 is equipped with an anti-frost system and a deep focus image sensor ensuring the highest accuracy 2D code reading even if the tubes aren't flush with the scanner plate or codes are partially compromised. The anti-frost system minimizes condensation of frozen samples on the scanner plate....
Designed with special features for the storage of fresh frozen tissue samples, Micronic releases the innovative and traceable 1.50ml and 3.00ml Hybrid tubes with external thread. With these uniform tissue storage products, Micronic enables biobanks to standardize and automate the handling and storage of tissue samples in the same way as their liquid samples....
Compatible with the complete Micronic range of 96-format tubes and racks - the cost-effective Push Cap Capper CP400 is designed to seal an entire rack of tubes with push caps in a single action. Compact and robust in design the CP400 capper is able to repeatedly and reliably securely cap tubes (up to 1.40 ml) in all ANSI /SLAS format racks up to a maximum height of 48mm.....
The Micronic Tube Reader DT500 is high-speed storage tube code reading at its best. Attractively designed to enhance your lab space - the DT500 is truly versatile - it reads 1D rack barcodes, 1D barcoded tubes and 2D Data-Matrix coded tubes (in 96-, 48- and 24-well formats) all in less than a second. The Micronic Tube Reader DT500 is a plug-and-play reader that requires no software installation and is very easy to use....
Micronic widens the range of successful “hybrid” tubes. The leader in sample storage introduced 4 coding concepts, a tube with multiple sample identification methods, last year. Since then the demand has only increased, which Micronic answered by introducing a wider spectrum of sizes to accommodate all Life Science industries. The new range is available in several sizes...
Micronic has joined an elite group of manufacturers committed to product transparency and sustainable procurement. Two of Micronic’s most popular 2D Data-Matrix Coded Screw-Cap Tubes, the 1.40 mL and the 4.00 mL, have received an ACT label. ACT is the first environmental impact factor label for laboratory products, developed by the non-profit My Green Lab. ACT—which stands for accountability, consistency, and transparency....
Micronic released the new innovative 2.00ml Tubes with External thread. These 2.00ml tubes are the first tubes of its kind, enabling researchers to store high volume samples in a space-efficient 96-well format. The tube provides an extraordinary storage capacity in 96-well format racks with a massive working volume of 1.55ml at room temperature. The high volume tubes are designed with thick tube walls for long-term sample storage....
Micronicis pleased to introduce a novel tool to help researchers perfectly seal their screw cap tubes. Micronic developed the new Micronic Screw Cap Recapper CS100 to guarantee that screw caps are tightened securely and uniformly on sample storage tubes. The tool is only available at Micronic but can be used to cap, decap or recap screw caps from various tube suppliers. When a cap is not properly secured, sample evaporation occurs.....
Micronic is pleased to announce the release of the new Micronic Rack Reader DR500 complete with in-house designed Micronic Code Reader Software.Optimized for rapid and accurate sample identification, the DR500 can scan and decode a whole rack of 2D data-matrix codes in less than 5 seconds and a single 96-well format tube in less than 2 seconds. Its small benchtop footprint makes the DR500 an efficient...
As the global population keeps rising, the demand for food increases. To meet this ever growing demand, scientists are searching for new, efficient and innovative ways to properly feed people around the world. Researchers are challenged to find immediate solutions, as well as the long-term reimagining of the global food supply. The scientists at JUST are creating a long term solution by building a highly advanced food system on the basis...
Micronic expands their range of ‘Hybrid’ tubes by introducing two innovative tubes that provide a better alternative to traditional cryo tubes. The so called 2.00ml and 3.00ml tubes with external thread hybrid guarantee sample traceability, optimize working volume and increase overall sample storage efficiency. The transparent part of the tube walls enable easy visual checking of the sample, while the 4 coding concepts...
Micronic launches a new recapping solution to accelerate sample storage workflows, the Micronic Screw Cap Recapper CS700. Designed to improve efficiency, the Micronic Screw Cap Recapper can be used as a stand-alone instrument or be simply integrated into a fully automated laboratory environment. This makes the screw cap recapper ideal for high throughput workflows and...
Micronic, leader in innovative sample storage and automation solutions, launches the new the Screw Cap Ultra. The Screw Cap Ultra is the latest addition to the range of caps for tubes with an internal thread that Micronic offers to seal tubes. The design of the cap is optimized for automated and manual handling....
The new range of Micronic Screw Cap Recappers is launched by Micronic to increase the efficiency of the sample storage process by accelerating the capping and decapping of screw cap tubes. Micronic received a good industrial design award (GIO award) for the innovative design of the recappers...
An exceptional new sample storage tube range is introduced by Micronic, leader in sample storage innovation, to guarantee the complete traceability of samples. The so called ‘‘hybrid’’ tubes are provided with white side walls allowing for 4 sample identification methods. The unique combination of 4 coding concepts on one tube enables extremely easy automated and visual sample identification...
To address the ever-increasing need for low volume genomics, Micronic developed the 0.30ml tube with external threadthat enables miniaturization of reaction volume required in genomic applications. The tube cuts out intermediate (screening) plates and is more accessible for low volume liquid handlers....
In order to accelerate the sample storage workflow in the lab, Micronic made the Manual Capper CM480 to seal a full rack of 96 tubes with push caps in a single action. The capper is extremely easy to use and makes the process of sealing tubes with push caps more efficient. The Manual Capper is an ideal economical alternative to large and automated capping equipment....
Micronic, innovator in sample storage solutions, adds two new Screw Cap Recappers to its sample handling equipment line: the Univo Screw Cap Recapper SR006 and SR004.
With these devices Micronic addresses the need of research laboratories for a cost-effective solution to recap 48-well and 24-well format sample storage tubes securely and uniformly, ensuring an optimal sealing performance. Designed in conjunction with several leading laboratories, the handheld devices offer users....
Designed with special features for the storage of fresh frozen tissue samples, Micronic releases the innovative and secure 1.00ml and 3.50ml tubes with external thread.
With these uniform tissue storage products, Micronic enables biobanks to standardize and automate the handling and storage of tissue samples in the same way as their liquid samples. As a result, the chance of mixing up tissue biopsy samples during handling is minimized, while the sample integrity during storage is maximized....
Bristol-Myers Squibb (BMS),an American biopharmaceutical company, uses Micronic TPE push caps and electric (de)capping equipment in their lab to make the handling of DNA samples more efficient and less time-consuming.
Kelly Shahi, Automation Engineering Specialist at the Automation Research Department commented, “The Micronic automatic capping and decapping solution definitively saves us a lot of time and the headache from capping and decapping all the samples manually...
To address the ever-increasing need for low volume genomics, Micronic launches the 0.30ml tube with external thread that enables miniaturization of reaction volume required in genomic applications.
The tube cuts out intermediate (screening) plates and is more accessible for low volume liquid handlers. In addition, the automation friendly 0.30ml tube with a working volume of 210µl, is ideal for RNA/DNA libraries, unique aliquoting and storage capacity with multi access....
To support healthcare and scientific research groups with high quality cytological cell samples, the National Clinical Cytology Biobank at the Karolinska Institute in Stockholm (Sweden) has invested in 2D coded sample storage tubes and sample handling equipment from Micronic to provide traceable, high integrity storage of its valuable gynaecological cell samples.
The Clinical Cytology Biobank was opened in August 2011 and installed at the Department of Laboratory Medicine of the Karolinska University Hospital. The development and implementation of the Clinical Cytology Biobank was governmentally funded in order to create a national standardized platform for the long-term storage of gynaecological cell samples...
The Micronic externally threaded 3.00ml tube provides an ideal and fully traceable storage solution for fresh frozen tissue samples with a size of 0.5cm3 to 1.0cm3.
Micronic 3.00ml tissue tubes offer easy and unambiguous identification and storage of fresh frozen tissue samples. The tubes have a unique 2D Data-Matrix code laser encrypted on the tube bottom and a large human readable code on the tube sidewall. The unique 2D code identifies the sample. Scanning the Micronic 24-2 storage rack will also identify the tube sample code with the location in the rack. For highly accurate and reliable results, the Micronic 3.00ml...
Micronic offers the unique Novitain™ Capping Solution to ensure sample integrity during the short-term storage of sample collection tubes.
Designed in conjunction with healthcare professionals, the solution consists of the Novitain TPE Capcluster-50, the 50-well format Novitain Storage Rack and the Manual Capper CV750. In medical laboratories analytical tests are usually conducted on blood and urine samples in order to obtain information about the health of a patient....
RadboudUMC, one of the largest and leading Academic Medical Centers in The Netherlands, has reported on its effective use of the Micronic Univo Screw Cap Recapper SR096 to securely seal its valuable DNA samples.
Mr Alwin Rikken,Operational Manager of the Central Genome Analysis Laboratory (CGAL) at the Human Genetics Department – Genome Diagnostics, praises its affordability and reliability. The CGAL conducts research on the relation between genes and diseases. Using advanced analysing techniques, the CGAL provides high quality and up-to-date prenatal and postnatal diagnostics of genetic disorders...
Sample preservation and storage solutions designer Micronic released the innovative new 0.75ml and 1.40ml tubes with an external screw thread.
The two tube sizes are the first in a range of new designs featuring an external thread. Using externally threaded tubes for sample storage eliminates the possibility of the sample coming into contact with the screw thread, greatly reducing the chance of cross-contamination while improving sample integrity....
Micronic presents the 0.75ml and 1.40ml Amber tinted polypropylene storage tubes that, used in conjunction with a secure screw cap or push cap, ensure the integrity of light sensitive biological samples even over long-term storage periods.
Available in Non-coded and laser encrypted 2D coded formats – the tubes are designed from special amber colored material eliminating sample degradation by exposure to light while still usefully allowing visual checking of enclosed sample volume. Supplied in a 96-position sample tube storage rack, that meets the globally recognized ANSI / SLAS standard footprint, Micronic 0.75ml and 1.40ml Amber storage tubes are...
The new Micronic Tube Selector is a very user friendly tool as it offers the convenience of single-handed operation and the possibility to manually pick individual tubes from any tube storage rack without the necessity of lifting them.
For laboratories looking to reduce sample contamination the new Micronic Tube Selector enables 'handsfree' manual picking and placing. An easy wipe clean surface further reduces the chances of sample contamination. A single thumb button enables the rapid and secure picking of a sample storage tube. Pressing the thumb button again releases the tube from the Tube Selector. The grippers of the tool are optimized to be...
Micronic has launched the Novitain™ Post-Analytical Capping Solution for the secure sealing of sample collection tubes after analytical tests have been conducted.
The offer includes the Capcluster-50, 50-well format Storage Rack and Manual Capper CV750. Blood and urine analysis are two of the most important diagnostic tools available to clinicians testing for evidence of infection, disease or abnormalities. Typically blood and urine is collected in vacuum tubes before being sent to a medical laboratory for testing. After these analytical tests, the vacuum tubes need to be securely...
The new Micronic Univo Screw Cap Recapper SR096 offers users the ability to cap, decap or recap 96 tubes with Screw Caps in a single action.
Easy to install and operate, the Univo SR096 decaps Screw Caps from a full 96-tube storage rack in less than 30 seconds. Through the graphical touch screen interface, the operator is able to select any rack to cap, decap or recap without using different adapters for different tube sizes. The Screw Cap Recapper uses a precisely determined toque value for optimal sealing quality thereby minimizing sample...
Dutch-based Micronic, a leader in sample preservation and storage, releases a line of tubes that improves sample integrity.
Sample storage solutions designer Micronic is announcing the launch of an innovative new 1.40ml tube with an external screw thread. The tube is the first in a range of new designs featuring an external thread, and will be available in May 2016. Using externally-threaded tubes for sample storage eliminates the possibility of the sample coming into contact with the screw thread, which greatly reduces the chance of...
Micronic has expanded its range of high quality 4.00ml sample storage tubes to now include non-coded, alphanumeric and 2D data matrix coded formats.
Offering a working volume of 2.70ml these tubes provide an ideal solution for storing larger volumes in a wide variety of short-term and long-term sample storage applications. Incorporating an internal thread screw cap with silicon O-ring - Micronic 4.00ml tubes provide optimal sealing enabling high integrity storage at ultra-low temperatures. Benefiting from a flat bottom – Micronic 4.00ml tubes also provide an ideal solution for...
Micronic has introduced a new range of Sample Storage Starter Packs that enable labs to start securely sealing and storing up to 4,000 samples.
Micronic Starter Packs contain everything needed to start using 2D coded sample storage tubes, enabling laboratory workers to maintain a secure sample logistics system and eliminate the costly possibility of false sample identities. Precisely manufactured in a certified Class 7 clean room production environment, a choice of RNase / DNase-free 0.75ml, 1.40ml, 3.00ml or 4.00ml sample storage tubes provides the versatility to suit almost...
With a working volume of 1.14ml*, Micronic 1.40ml round bottom tubes are proven to be an industry standard solution for many sample storage applications.
Available in non-coded or alphanumeric coded versions, Micronic 1.40ml round bottom tubes provide an affordable way to improve your sample storage, handling and logistic processes. Micronic 1.40ml tubes can be purchased in bulk lots, refills or racked for 96-tube format use in the Comorack-96 or the fully automation compatible Roborack-96. Manufactured from highest medical grade polypropylene in a fully automated class...
A new technical study from Micronic reports on tests carried out to demonstrate the absence of extractable organic contaminants in their polypropylene sample storage tubes. Extractables-free sample storage
The possibility of extractables being leached out of polypropylene tubes by aqueous or organic solvents is a major concern to many organisations looking to safeguard their valuable stored samples from contamination. In the tests carried out, samples of Micronic polypropylene sample storage tubes were extracted with 10% absolute ethanol in ultrapure water and the extract was then analysed using highly sensitive GC-FID and GC-MS...
A new technical study from Micronic reports on tests carried out to demonstrate the absence of extractable organic contaminants in their polypropylene sample storage tubes.Extractables-free sample storage
The possibility of extractables being leached out of polypropylene tubes by aqueous or organic solvents is a major concern to many organisations looking to safeguard their valuable stored samples from contamination. In the tests carried out, samples of Micronic polypropylene sample storage tubes were extracted with 10% absolute ethanol in ultrapure water and the extract was then analysed using highly sensitive GC-FID and GC-MS instrumentation...
For sample storage facilities, each millimetre of freezer space counts.
To address the need for compact storage labware - the Micronic range of low profile screw caps for their 96-well format screw cap storage tubes (0.50ml, 0.75ml, 1.10ml, 1.40ml and 2.00ml) result in space savings of up to 33%**. The low profile screw cap was designed in conjunction with Professor Thomas Illig from the Hannover Unified Biobank in Germany. He commented “ Micronic's low profile screw cap and screw cap storage tubes offer the...
Micronic has published a technical note that describes a study in which the protein binding properties of commercially available sample storage tubes was tested.
Driven by the rapid growth in proteomics and protein research applications the need for storage tubes where interaction between the sample and the tube surface is minimised has grown exponentially. The need for storage tubes that exhibit ultra-low binding properties is critical to these research fields due to the low concentrations of proteins typically found in samples. In the study – protein binding measurement tests were performed on Micronic...
Using the new ergonomic Micronic Univo Screw Cap Recapper SR008 it is possible to cap or decap 8 tubes with screw caps in a single action.
Developed in conjunction with several leading laboratories the handheld device offers users the ability to cap a row of 8 tubes in 5 seconds and a whole rack of 96 tubes in only 1 minute. The Screw Cap Recapper is 10 times faster than manually capping tubes thereby minimizing sample evaporation and significantly improving your productivity. In addition the Screw Cap Recapper ensures each screw cap is reproducibly tightened securely and uniformly...
Precision manufactured in a certified Class 7 clean room production facility, the new 24-, 48- and 96-tube Ultra-Low Temperature (ULT) rack range from Micronic are based on the automation compatible ANSI / SLAS dimensional footprint.
Micronic ULT racks incorporate a wealth of useful features to aid automation. These features include a novel Twist-Lock design which prevents tubes from turning during screw (de)capping; easy lead-in tube and cover placement; closed side walls with minimal notches for perfect rack orientation and a unique automation-friendly cover lock system. Absolute traceability and reproducibility on ULT racks is ensured through novel laser-etched...
Precision manufactured in a certified Class 7 clean room production facility, the new 24-, 48- and 96-tube Ultra-Low Temperature (ULT) rack range from Micronic are based on the automation compatible ANSI / SLAS dimensional footprint.
Micronic ULT racks incorporate a wealth of useful features to aid automation. These features include a novel Twist-Lock design which prevents tubes from turning during screw (de)capping; easy lead-in tube and cover placement; closed side walls with minimal notches for perfect rack orientation and a unique automation-friendly cover lock system. Absolute traceability and reproducibility on ULT racks is ensured through novel laser-etched...
The new Micronic Handheld Wireless Scanner MINI enables users to reliably read 1D and 2D tube and rack codes almost instantly.
Measuring just 135 x 41 x 30mm and weighing only 80g, this small lightweight device is practical to carry around, easy-to-use and can read any 1D barcode or 2D Data-Matrix code on 24-, 48- and 96-well format tubes and racks. Due to its compact size and wireless operation - the Handheld Wireless Scanner MINI offers convenient, high performance scanning anywhere where you might need it. Users can now wirelessly read...
Micronic has launched the new Univo Manual Capper CM480 - a versatile product designed to seal an entire rack of tubes with push caps in a single action.
Compact and robust in design the Univo Manual Capper is able to repeatedly and reliably securely cap tubes (up to 1.40 ml) in all ANSI /SLAS format racks up to a maximum height of 48mm. To ensure optimum results an adapter matched to your specific rack type and tube height is supplied. Built to meet the varying needs of different users, the Univo Manual Capper can seal full or partially full racks with the complete range of Micronic TPE or EVA plug style...
Compatible with the complete Micronic range of 96-format tubes and racks - the new Univo Manual Capper CM480 is designed to seal an entire rack of tubes with push caps in a single action.
Compact and robust in design the Univo Manual Capper is able to repeatedly and reliably securely cap tubes (up to 1.40 ml) in all ANSI /SLAS format racks up to a maximum height of 48mm. To ensure optimum results an adapter matched to your specific rack type and tube height is supplied. Built to meet the varying needs of different users, the Univo Manual Capper can seal full or partially full racks with the complete range of Micronic TPE or EVA plug...
Micronic has announced the launch of an Automatic Screw Cap DeCapper™ system.
The next-generation Screw Cap DeCapper is an innovative, easy-to-use device that provides automated decapping/capping of screw cap storage tubes in 96-tube racks in portrait or landscape formats. The device is able to cap or decap 96 Screw Cap tubes, in rows of 8 or 12, in just 60 seconds. The new device is able to provide an automated capping / decapping solution for Micronic screw cap tubes, screw caps and the recently introduced low profile screw caps...
Micronic has launched a new externally threaded 3.00ml tube that provides a fully traceable storage solution for tissue samples.
With a unique 2-dimensional Data Matrix code laser encrypted on the tube bottom, and large human readable code on the tube sidewall – Micronic 3.00ml tissue tubes provide easy and unambiguous identification and storage of your donor and transplant samples. The unique 2D code identifies the sample, its coordinates within a 24-tube storage rack, the particular rack and the location of the rack in your freezer. For highly accurate and reliable results - Micronic 3.00ml tissue tubes are produced from medical-grade polypropylene....
Micronic has added a Modular Vertical Freezer Rack to its extensive range of sample storage accessories for biobanking.
The Modular Freezer Rack provides a flexible and low cost solution for organising sample storage in a chest freezer. The lightweight modular storage system fits into all chest freezers and is fully compatible with all ANSI / SLAS standard footprint storage racks. To set up the easy-to-use modular system simply click individual rack holders (height: 68mm) together to construct a tower of up to 15 holders..
For biobanks and laboratories looking to securely organise and track their stored samples - the new version 4.903 Track-IT™ Information management system from Micronic enables users to scan tube codes directly into the software.
With Micronic Traxcer code reader software now fully integrated with Track-IT - users can directly trigger tube or rack barcode scanning from the Track-IT program. The new version of the automation friendly information management solution allows you to scan in only 5 seconds and transfer the codes directly into the Track-IT database program...
Targeting the ever-growing requirement for higher sample throughput the new generation Univo Electric Decapper DC480 from Micronic enables labs tasked with opening multiple sample storage tubes to achieve significant productivity gains
The Univo Electric Decapper DC480 is the latest addition to Micronic’s redesigned 'blue-white' line of productive sample handling equipment, that is not only compatible with all Micronic tubes (up to 1.40ml) but also with tubes and caps of other brands. Through an improved user interface the operator is able to select any rack to decap, without using different adapters for different tube sizes / brands...
Micronic has introduced a range of laser etched alphanumeric coded sample storage tubes (0.5ml, 0.75ml, 1.1ml and 1.4ml)
The new tubes have a flat polypropylene bottom on which the alphanumeric code is encrypted with a laser. Uniquely manufactured from a single component - the code of Micronic laser encrypted alphanumeric codes cannot fade or peel off even when subjected to repeated handling, exposure to different solvents or multiple freeze-thaw cycles. Because code clarity will remain unchanged throughout their lifetime - Micronic laser etched alphanumeric coded tubes offer the security of unmatched sample traceability...
Drawing upon over 25 years experience of helping labs safeguard their samples - Micronic Europe has built a global reputation for implementing integrated sample storage solutions for Biobanking and Biorepository organisations
As a specialist supplier of top quality sample storage tubes, racks, tube cappers, rack barcode readers and data management software - Micronic is a one-stop supply partner for Biobanks and Biorepositories looking to securely and traceably store up to tens of thousands of samples per month...
Rapid Automated Scanning of Rack Barcodes
Jul 28, 2012Micronic Europe BV, specialists in traceable sample storage solutions, announces the introduction of the new Tracxer BC210.
The Tracxer BC210 is a linear barcode reader which allows you to scan 1D barcodes on racks. Operating as an accessory for the Micronic RS210 Tracxer Code Reader it is now possible to read both your rack barcode and storage tube codes within just 5 seconds. Quick and easy to install on the Tracxer RS210 - the Tracxer BC210 linear barcode reader further minimizes the risk of incorrectly placed racks and increases sample and rack traceability...
At just 25.6mm tall and offering a massive 475 microlitres working volume - Octygen uses just 60% of the space typical 0.50ml 96-well screw cap tubes use to store the same volume. Consequently the increased storage density possible with Octygen translates into direct savings on your storage costs...
Biobank Graz Reports On Micronic Sample Storage
Mar 20, 2012Europe's largest biorepository - Biobank Graz (Graz, Austria) has reported on its use of sample storage consumables and data management software from Micronic Europe to safeguard its blood, serum and plasma samples. Biobank Graz is a non-profit making service facility of the Medical University Graz, which supports the search for the underlying causes of disease and improvements in disease diagnosis and therapy...
Micronic Launch Sample Storage Range for Tissue Banks & Donor Organisations
Oct 28, 2011Micronic Europe BV has launched a traceable sample management system for donor organisations and banks looking to streamline the storage of blood, bone, allograft and tissue bank materials. For tissue, bone, blood and allograft organizations, the integrity and handling of each sample is critical. Drawing upon over 25 years experience of supplying sample storage and management solutions to pharmaceutical, biobanking and forensic labs worldwide - Micronic have developed a traceable sample storage system for donor organizations and tissue banks...
Out-of-Box Solution for Managing Lab Information
Jul 11, 2011Micronic has announced a new version 4.6 of its popular Track-ITTM information management system. Track-IT is a unique out-of-the-box LIMS/LIS solution made for scientists enabling you to reorganize and track your tubes and samples in just minutes. Fully compatible with most commercial barcode readers, scanners and Tubesorter systems - Track-IT allows you to catalogue and organise samples quickly and efficiently...
Space Saving Sample Tubes for Low Temperature Storage
Jun 20, 2011The 0.5ml V-Bottom Cryotube from Micronic Europe enables Automated Biobanking and Cryobanking facilities to securely store low volume samples at temperatures below minus 80°C. The internal V-shape of the 0.5ml Cryotube provides the lowest possible dead volume and maximum recovery of scarce samples. In addition the short profile of the 0.5ml Cryotube enables automated storage facilities to use up to 50% less space compared to storage in traditional tube designs...
Microplate Adhesive Sealing Films
Apr 6, 2011Available from Micronic Europe - the Pattern range of microplate adhesive sealing films has been designed to eliminate clogging and contamination of autosampler needles, maintain high sample integrity and provide the best barrier film for a wide variety of diagnostic and life science sample storage applications...
Uniquely versatile tube storage of light sensitive samples
Feb 1, 2011Micronic Europe has announced a new 1.4ml amber polypropylene storage tube that, used in conjunction with a secure screw cap, ensures the integrity of light sensitive biological samples even over long-term storage periods.
Laser Etched Sample Tube Storage Rack
Jan 18, 2011Micronic has introduced a next generation version of its popular Roborack 96-position sample tube storage rack. Traditionally users have used adhesive paper labels on their storage racks to provide sample traceability. However over a period of time, subject to repeated freeze thaw cycles and organic solvents which samples are often dissolved in, paper labels commonly degrade or fall off.
Micronic Launches Informative Multi-media Sample Storage Website
Sep 21, 2010Micronic Europe has announced the launch of a new comprehensively featured website (www.micronic.com) designed to offer a wide variety of useful information to organisations involved with safeguarding one of their most valuable assets - their samples
Pre-capped Sample Storage Tubes
Aug 11, 2010Pre-capped sample storage tubes from Micronic Europe are manufactured under US Federal standard 209E Class 7 cleanroom conditions to ensure cleanliness and sterility.
Versatile, High Integrity Sample Storage Caps
Jun 30, 2010Micronic Europe has produced a patented sealing method for its sample storage tubes. Designed to increase productivity and eliminate expensive tube capping systems, Micronic Capcluster sample storage caps offer the unique versatility of single action capping of a single tube, a row of tubes, or a complete 96-tube rack
DNA-free Consumables for Forensic Sample Storage
May 27, 2010Micronic Europe BV has introduced a range of new storage tubes (0.50ml, 0.75ml, 1.10ml and 1.40ml) and capping products that absolutely secure the long term integrity of DNA samples for forensic analysis.
Complete Sample Storage Solution For Biobanking & Repositories
Apr 22, 2010Micronic Europe BV has announced it will display its latest products for traceable sample storage at the forthcoming International Society for Biological and Environmental Repositories (ISBER 2010) in Rotterdam, The Netherlands (11th-14th May 2010).
Automated Decapper for Screw Cap Sample Storage Tubes
Feb 17, 2010The ScrewCap DeCapper available from Micronic Europe BV is a compact, automated instrument for the opening and closing of screw-capped tubes (0.5 - 1.4ml).
Efficient organisation and tracking of samples
Feb 1, 2010Developed for Micronic - Track-ITTM is a new Sample Management System interfaced to a 2D code reader that allows you to reliably and efficiently organise and track individual samples.
Developed for Micronic - Track-ITTM is a new Sample Management System interfaced to a 2D code reader that allows you to reliably and efficiently organise and track individual samples.
Aluminium Tube Decapper Avoids Need to Thaw Samples
Dec 9, 2009For laboratories handling smaller numbers of cryogenically stored samples - the new Aluminium Decapper-8 from Micronic Europe BV enables quick and simple opening of lightly frozen sample storage tubes.
Automatic Tube Decapper Accelerates Sample Storage Workflow.
Sep 28, 2009Micronic Europe BV, specialists in sample storage solutions, has announced a new Automatic Tube Decapper that accelerates the time consuming and tedious process of removing caps from sample storage tubes.
Micronic is excited to expand its Eco-Friendly Choice product line with the introduction of the EFC Refill Rack, a product designed with sustainability at its core. The first-of-its-kind EFC Refill Rack comprises a reusable base rack and cover, and a refill system made of 99% in-house renewed materials, highlighting Micronic’s commitment to both environmental responsibility and superior functionality...
Micronic, leader in developing cutting-edge sample storage solutions, proudly unveils its latest innovation: an Eco-Friendly Rack Range. These Eco-Friendly Choice (EFC) Racks are made of 99% in-house renewed material (RM), setting a new sustainable standard for sample storage racks. The racks are an ideal solution for laboratories committed to embracing a greener future...
Micronic launches its first high speed camera-based rack reader, for fast and precise rack reading: the Micronic Rack Reader DR900, complete with the intuitive Micronic Code Reader Software. Optimized for rapid and accurate sample identification, the DR900 high speed reader can read and decode a whole rack of 2D Data-Matrix codes in just 3 seconds. The new DR900 is compatible with most brands of 2D Data-Matrix coded tubes whether they are in a 139-, 96-, 48-, or 24-well format...
Micronic launches a new addition to its comprehensive automatic recapping equipment range to accelerate sample storage workflows: the Screw Cap Recapper CS700 with Extended Height. The extended height of the CS700 gives researchers now the ability to automatically cap, decap and recap tubes in 96-well format up to 2.00ml. Designed to improve efficiency, the Micronic Screw Cap Recapper can be used as a stand-alone instrument or be simply integrated into a fully automated laboratory environment...
Micronic launches a complete line of automation friendly Screw Cap Carriers. The Cap Carriers are fully compatible with the automated Screw Cap Capping and Decapping equipment offered by Micronic. Based on the Society for Laboratory Automation and Screening (ANSI/SLAS) standards, the Screw Cap Carriers accommodate 96-, 48-, and 24-well format Screw Caps. The Disposable Cap Carriers are compatible with all Micronic Screw Caps for both internally and externally threaded tubes...
Targeting the ever-growing requirement for higher sample throughput the robust Push Cap Decapper CP620 from Micronic enables labs tasked with opening multiple sample storage tubes with TPE Septum Caps to achieve significant productivity gains. The Push Cap Decapper CP620 is not only compatible with Micronic tubes (up to 1.40ml) and TPE Septum Caps but also with tubes and caps of other brands...
The Micronic 0.80ml Tube with External Thread provides research labs the best volume to height ratio compared to similar sample storage tubes in the market. With its mere 38.3mm height the 0.80ml tube offers 0.75ml working volume at ambient temperature. The temperature storage range of the 0.80ml biobanking tube varies from vapor phase LN2 up to +100?C which makes the tube fit various laboratory needs...
Micronic, leader in innovative sample storage and automation solutions launches the Micronic Tube Reader DT510. The Micronic DT510 is high-speed storage tube code reading at its best. Attractively designed to enhance your lab space – the Micronic DT510 is truly versatile - it reads 1D rack barcodes, 1D barcoded tubes and 2D Data-Matrix coded tubes (in 96-, 48- and 24-well formats) all in less than a second...
Micronic, leader in innovative sample storage and automation solutions, adds an additional 2D Data-Matrix code on the bottom of the 96-1, 96-Q1, 96-2, 96-3 and 96-4 Micronic ULT Racks. With this additional 2D code, the Micronic ULT Racks are now provided with five different codings. The rack features a cover print indicating the rack and tube type, a unique laser-etched alphanumeric coding on top of the rack, a 1D barcode and human readable code on the side of the rack and a 2D Data-Matrix code on the bottom of the rack....
Micronic, leader in innovative sample storage and automation solutions, launches the new 138-2 High Density (HD) Rack. The Micronic 138-2 HD storage rack accommodates 138 individual 0.75ml internally threaded or externally threaded (hybrid) tubes or 0.80ml externally threaded tubes in an automation compatible ANSI/SLAS dimensional footprint....
Micronic is pleased to announce the release of the new Rack Reader DR710, complete with the intuitive Micronic Code Reader Software. The DR710 is equipped with a deep focus image sensor ensuring the highest accuracy 2D code reading even if the tubes aren't flush with the scanner plate or codes are partially compromised. By activating the uniquely designed active anti-frost system on the DR710, ambient air is drawn into the scanner where it is cleaned of dust....
Micronic, leader in innovative sample storage and automation solutions, launches a new Screw Cap for Tubes with External Thread. The Screw Cap IG has an improved gripping for both manually and automated handling, the newly designed lead-in on top of the Screw Cap ensures a better tube placement and the optimized cap height (5.8mm) makes storage in automated stores more efficient...
Anticipating on the increasing demand for externally threaded tubes, Micronic launches the 1.10ml Tubes with External Thread. The 1.10ml tube with external thread capped with a screw cap has the same height as a Micronic 1.40ml tube with internal thread capped with a push cap, making it the ideal tube for users that want to switch to an externally threaded screw cap tube....
Micronic launches an optional Docking Station for its CS500, CS510 and CS520 Screw Cap Recappers. Using the Docking Station in combination with the Screw Cap Recappers, a consistent capping and decapping action is assured, allowing research laboratories to recap 96-well, 48-well and 24-well format sample storage tubes securely and uniformly for an optimal sealing performance...
Micronic, leader in innovative sample storage and automation solutions, launches the Tube Handler HT500. The HT500 is an efficient and effective answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes....
With an extensive range of versatile Screw Cap Recappers, Micronic increases the efficiency of the sample storage or testing process by accelerating the capping and decapping of screw cap tubes. Micronic offers two product lines, the Screw Cap Recapper CS500 series and the Screw Cap Recapper CS700 series. The recappers are compatible with either 96-well, 48-well or 24-well format sample storage tubes...
Manufactured from highest medical grade polypropylene, Micronic 1.40ml round bottom tubes are proven to be an industry standard solution for many laboratory processes. The tubes provide an affordable way to improve sample storage, handling, screening and logistics. Many laboratories use the 1.40ml tubes for short-term storage or intermediate processes such as sample analysis or homogenization of samples using beads....
Targeting the ever-growing requirement for higher sample throughput the robust Push Cap Decapper CP620 from Micronic enables labs tasked with opening multiple sample storage tubes to achieve significant productivity gains. The Push Cap Decapper CP620 is the latest addition to Micronic’s line of productive sample handling equipment, that is not only compatible with all Micronic tubes (up to 1.40ml) but also with tubes and caps of other brands....
Micronic, leader in innovative sample storage and automation solutions, is proud to announce the release of the new 0.30ml, 0.75ml and 1.40ml Non-coded Tubes with External Thread in 96-well format. These tube sizes are unique in the market! The Micronic Non-coded Tubes provide an affordable way to improve sample preparation, processing, screening and logistics....
Micronic, leader in innovative sample storage and automation solutions, offers the new Micronic TPE Capcluster-96 and Capmat-96 for externally threaded tubes. These sealing solutions complement the comprehensive line of the Micronic External Thread (Hybrid) tubes. The TPE caps offer reliable options for maintaining the integrity of tube contents at temperature down to -80°C, allowing to store samples confidently....
Micronic, leader in innovative sample storage and automation solutions, launches the state-of-the-art Micronic Tube Handler HT700. The HT700 is a brisk and an advanced answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes at room temperature....
Micronic, leader in innovative sample storage and automation solutions, launches the state-of-the-art Micronic Tube Handler HT700. The HT700 is a brisk and an advanced answer for otherwise monotonous and mistake inclined manual arraying of sample tubes. Reconfigure or single out sample tubes in 96-well format Micronic racks (ANSI/SLAS standard) for downstream processes at room temperature....
Micronic has launched the Rack Reader DR700 complete with in-house designed Micronic Code Reader Software and an optional Side Barcode Reader. The DR700 is equipped with an anti-frost system and a deep focus image sensor ensuring the highest accuracy 2D code reading even if the tubes aren't flush with the scanner plate or codes are partially compromised. The anti-frost system minimizes condensation of frozen samples on the scanner plate....
Designed with special features for the storage of fresh frozen tissue samples, Micronic releases the innovative and traceable 1.50ml and 3.00ml Hybrid tubes with external thread. With these uniform tissue storage products, Micronic enables biobanks to standardize and automate the handling and storage of tissue samples in the same way as their liquid samples....
Compatible with the complete Micronic range of 96-format tubes and racks - the cost-effective Push Cap Capper CP400 is designed to seal an entire rack of tubes with push caps in a single action. Compact and robust in design the CP400 capper is able to repeatedly and reliably securely cap tubes (up to 1.40 ml) in all ANSI /SLAS format racks up to a maximum height of 48mm.....
Micronic widens the range of successful “hybrid” tubes. The leader in sample storage introduced 4 coding concepts, a tube with multiple sample identification methods, last year. Since then the demand has only increased, which Micronic answered by introducing a wider spectrum of sizes to accommodate all Life Science industries. The new range is available in several sizes...
Micronic has joined an elite group of manufacturers committed to product transparency and sustainable procurement. Two of Micronic’s most popular 2D Data-Matrix Coded Screw-Cap Tubes, the 1.40 mL and the 4.00 mL, have received an ACT label. ACT is the first environmental impact factor label for laboratory products, developed by the non-profit My Green Lab. ACT—which stands for accountability, consistency, and transparency....
Micronic released the new innovative 2.00ml Tubes with External thread. These 2.00ml tubes are the first tubes of its kind, enabling researchers to store high volume samples in a space-efficient 96-well format. The tube provides an extraordinary storage capacity in 96-well format racks with a massive working volume of 1.55ml at room temperature. The high volume tubes are designed with thick tube walls for long-term sample storage....
Micronicis pleased to introduce a novel tool to help researchers perfectly seal their screw cap tubes. Micronic developed the new Micronic Screw Cap Recapper CS100 to guarantee that screw caps are tightened securely and uniformly on sample storage tubes. The tool is only available at Micronic but can be used to cap, decap or recap screw caps from various tube suppliers. When a cap is not properly secured, sample evaporation occurs..... copy.jpg)
Micronic
As the global population keeps rising, the demand for food increases. To meet this ever growing demand, scientists are searching for new, efficient and innovative ways to properly feed people around the world. Researchers are challenged to find immediate solutions, as well as the long-term reimagining of the global food supply. 
Micronic expands their range of ‘Hybrid’ tubes by introducing two innovative tubes that provide a better alternative to traditional cryo tubes. The so called 2.00ml and 3.00ml tubes with external thread hybrid guarantee sample traceability, optimize working volume and increase overall sample storage efficiency. The transparent part of the tube walls enable easy visual checking of the sample, while the 4 coding concepts...
Micronic
Micronic, 
The new range of Micronic Screw Cap Recappers is launched by Micronic to increase the efficiency of the sample storage process by accelerating the capping and decapping of screw cap tubes. Micronic received a good industrial design award (GIO award) for the innovative design of the recappers...
An exceptional new sample storage tube range is introduced by Micronic, leader in sample storage innovation, to guarantee the complete traceability of samples. 
To address the ever-increasing need for low volume genomics, Micronic developed the 
In order to accelerate the sample storage workflow in the lab, Micronic made the 
With these devices Micronic addresses the need of research laboratories for a cost-effective solution to recap 48-well and 24-well format sample storage tubes securely and uniformly, ensuring an optimal sealing performance. Designed in conjunction with several leading laboratories, the handheld devices offer users....
With these uniform tissue storage products, Micronic enables biobanks to standardize and automate the handling and storage of tissue samples in the same way as their liquid samples. As a result, the chance of mixing up tissue biopsy samples during handling is minimized, while the sample integrity during storage is maximized....
Kelly Shahi, Automation Engineering Specialist at the Automation Research Department commented, “The Micronic automatic capping and decapping solution definitively saves us a lot of time and the headache from capping and decapping all the samples manually...
The tube cuts out intermediate (screening) plates and is more accessible for low volume liquid handlers. In addition, the automation friendly 0.30ml tube with a working volume of 210µl, is ideal for RNA/DNA libraries, unique aliquoting and storage capacity with multi access....
The Clinical Cytology Biobank was opened in August 2011 and installed at the Department of Laboratory Medicine of the Karolinska University Hospital. The development and implementation of the Clinical Cytology Biobank was governmentally funded in order to create a national standardized platform for the long-term storage of gynaecological cell samples...
Micronic 3.00ml tissue tubes offer easy and unambiguous identification and storage of fresh frozen tissue samples. The tubes have a unique 2D Data-Matrix code laser encrypted on the tube bottom and a large human readable code on the tube sidewall. The unique 2D code identifies the sample. Scanning the Micronic 24-2 storage rack will also identify the tube sample code with the location in the rack. For highly accurate and reliable results, the Micronic 3.00ml...
Designed in conjunction with healthcare professionals, the solution consists of the Novitain TPE Capcluster-50, the 50-well format Novitain Storage Rack and the Manual Capper CV750. In medical laboratories analytical tests are usually conducted on blood and urine samples in order to obtain information about the health of a patient....
Mr Alwin Rikken,Operational Manager of the Central Genome Analysis Laboratory (CGAL) at the Human Genetics Department – Genome Diagnostics, praises its affordability and reliability. The CGAL conducts research on the relation between genes and diseases. Using advanced analysing techniques, the CGAL provides high quality and up-to-date prenatal and postnatal diagnostics of genetic disorders...
The two tube sizes are the first in a range of new designs featuring an external thread. Using externally threaded tubes for sample storage eliminates the possibility of the sample coming into contact with the screw thread, greatly reducing the chance of cross-contamination while improving sample integrity....
Available in Non-coded and laser encrypted 2D coded formats – the tubes are designed from special amber colored material eliminating sample degradation by exposure to light while still usefully allowing visual checking of enclosed sample volume. Supplied in a 96-position sample tube storage rack, that meets the globally recognized ANSI / SLAS standard footprint, Micronic 0.75ml and 1.40ml Amber storage tubes are...
For laboratories looking to reduce sample contamination the new Micronic Tube Selector enables 'handsfree' manual picking and placing. An easy wipe clean surface further reduces the chances of sample contamination. A single thumb button enables the rapid and secure picking of a sample storage tube. Pressing the thumb button again releases the tube from the Tube Selector. The grippers of the tool are optimized to be...
The offer includes the Capcluster-50, 50-well format Storage Rack and Manual Capper CV750. Blood and urine analysis are two of the most important diagnostic tools available to clinicians testing for evidence of infection, disease or abnormalities. Typically blood and urine is collected in vacuum tubes before being sent to a medical laboratory for testing. After these analytical tests, the vacuum tubes need to be securely...
Easy to install and operate, the Univo SR096 decaps Screw Caps from a full 96-tube storage rack in less than 30 seconds. Through the graphical touch screen interface, the operator is able to select any rack to cap, decap or recap without using different adapters for different tube sizes. The Screw Cap Recapper uses a precisely determined toque value for optimal sealing quality thereby minimizing sample...
Sample storage solutions designer Micronic is announcing the launch of an innovative new 1.40ml tube with an external screw thread. The tube is the first in a range of new designs featuring an external thread, and will be available in May 2016. Using externally-threaded tubes for sample storage eliminates the possibility of the sample coming into contact with the screw thread, which greatly reduces the chance of...
Offering a working volume of 2.70ml these tubes provide an ideal solution for storing larger volumes in a wide variety of short-term and long-term sample storage applications. Incorporating an internal thread screw cap with silicon O-ring - Micronic 4.00ml tubes provide optimal sealing enabling high integrity storage at ultra-low temperatures. Benefiting from a flat bottom – Micronic 4.00ml tubes also provide an ideal solution for...
Micronic Starter Packs contain everything needed to start using 2D coded sample storage tubes, enabling laboratory workers to maintain a secure sample logistics system and eliminate the costly possibility of false sample identities. Precisely manufactured in a certified Class 7 clean room production environment, a choice of RNase / DNase-free 0.75ml, 1.40ml, 3.00ml or 4.00ml sample storage tubes provides the versatility to suit almost...
Available in non-coded or alphanumeric coded versions, Micronic 1.40ml round bottom tubes provide an affordable way to improve your sample storage, handling and logistic processes. Micronic 1.40ml tubes can be purchased in bulk lots, refills or racked for 96-tube format use in the Comorack-96 or the fully automation compatible Roborack-96. 
The possibility of extractables being leached out of polypropylene tubes by aqueous or organic solvents is a major concern to many organisations looking to safeguard their valuable stored samples from contamination. In the tests carried out, samples of Micronic polypropylene sample storage tubes were extracted with 10% absolute ethanol in ultrapure water and the extract was then analysed using highly sensitive GC-FID and GC-MS...
The possibility of extractables being leached out of polypropylene tubes by aqueous or organic solvents is a major concern to many organisations looking to safeguard their valuable stored samples from contamination. In the tests carried out, samples of Micronic polypropylene sample storage tubes were extracted with 10% absolute ethanol in ultrapure water and the extract was then analysed using highly sensitive GC-FID and GC-MS instrumentation...
To address the need for compact storage labware - the Micronic range of low profile screw caps for their 96-well format screw cap storage tubes (0.50ml, 0.75ml, 1.10ml, 1.40ml and 2.00ml) result in space savings of up to 33%**. The low profile screw cap was designed in conjunction with Professor Thomas Illig from the Hannover Unified Biobank in Germany. He commented “ Micronic's low profile screw cap and screw cap storage tubes offer the...
Driven by the rapid growth in proteomics and protein research applications the need for storage tubes where interaction between the sample and the tube surface is minimised has grown exponentially. The need for storage tubes that exhibit ultra-low binding properties is critical to these research fields due to the low concentrations of proteins typically found in samples. In the study – protein binding measurement tests were performed on Micronic...
Developed in conjunction with several leading laboratories the handheld device offers users the ability to cap a row of 8 tubes in 5 seconds and a whole rack of 96 tubes in only 1 minute. The Screw Cap Recapper is 10 times faster than manually capping tubes thereby minimizing sample evaporation and significantly improving your productivity. In addition the Screw Cap Recapper ensures each screw cap is reproducibly tightened securely and uniformly...
Micronic ULT racks incorporate a wealth of useful features to aid automation. These features include a novel Twist-Lock design which prevents tubes from turning during screw (de)capping; easy lead-in tube and cover placement; closed side walls with minimal notches for perfect rack orientation and a unique automation-friendly cover lock system. Absolute traceability and reproducibility on ULT racks is ensured through novel laser-etched...
Micronic ULT racks incorporate a wealth of useful features to aid automation. These features include a novel Twist-Lock design which prevents tubes from turning during screw (de)capping; easy lead-in tube and cover placement; closed side walls with minimal notches for perfect rack orientation and a unique automation-friendly cover lock system. Absolute traceability and reproducibility on ULT racks is ensured through novel laser-etched...
Measuring just 135 x 41 x 30mm and weighing only 80g, this small lightweight device is practical to carry around, easy-to-use and can read any 1D barcode or 2D Data-Matrix code on 24-, 48- and 96-well format tubes and racks. Due to its compact size and wireless operation - the Handheld Wireless Scanner MINI offers convenient, high performance scanning anywhere where you might need it. Users can now wirelessly read...
Compact and robust in design the Univo Manual Capper is able to repeatedly and reliably securely cap tubes (up to 1.40 ml) in all ANSI /SLAS format racks up to a maximum height of 48mm. To ensure optimum results an adapter matched to your specific rack type and tube height is supplied. Built to meet the varying needs of different users, the Univo Manual Capper can seal full or partially full racks with the complete range of Micronic TPE or EVA plug style...
The next-generation Screw Cap DeCapper is an innovative, easy-to-use device that provides automated decapping/capping of screw cap storage tubes in 96-tube racks in portrait or landscape formats. The device is able to cap or decap 96 Screw Cap tubes, in rows of 8 or 12, in just 60 seconds. The new device is able to provide an automated capping / decapping solution for Micronic screw cap tubes, screw caps and the recently introduced low profile screw caps...
With a unique 2-dimensional Data Matrix code laser encrypted on the tube bottom, and large human readable code on the tube sidewall – Micronic 3.00ml tissue tubes provide easy and unambiguous identification and storage of your donor and transplant samples. The unique 2D code identifies the sample, its coordinates within a 24-tube storage rack, the particular rack and the location of the rack in your freezer. For highly accurate and reliable results - Micronic 3.00ml tissue tubes are produced from medical-grade polypropylene....
The Univo Electric Decapper DC480 is the latest addition to Micronic’s redesigned 'blue-white' line of productive sample handling equipment, that is not only compatible with all Micronic tubes (up to 1.40ml) but also with tubes and caps of other brands. Through an improved user interface the operator is able to select any rack to decap, without using different adapters for different tube sizes / brands...
As a specialist supplier of top quality sample storage tubes, racks, tube cappers, rack barcode readers and data management software - Micronic is a one-stop supply partner for Biobanks and Biorepositories looking to securely and traceably store up to tens of thousands of samples per month...
The Tracxer BC210 is a linear barcode reader which allows you to scan 1D barcodes on racks. Operating as an accessory for the Micronic RS210 Tracxer Code Reader it is now possible to read both your rack barcode and storage tube codes within just 5 seconds. Quick and easy to install on the Tracxer RS210 - the Tracxer BC210 linear barcode reader further minimizes the risk of incorrectly placed racks and increases sample and rack traceability...
At just 25.6mm tall and offering a massive 475 microlitres working volume - Octygen uses just 60% of the space typical 0.50ml 96-well screw cap tubes use to store the same volume. Consequently the increased storage density possible with Octygen translates into direct savings on your storage costs...
Europe's largest biorepository - Biobank Graz (Graz, Austria) has reported on its use of sample storage consumables and data management software from Micronic Europe to safeguard its blood, serum and plasma samples. Biobank Graz is a non-profit making service facility of the Medical University Graz, which supports the search for the underlying causes of disease and improvements in disease diagnosis and therapy... 
Micronic Europe BV has launched a traceable sample management system for donor organisations and banks looking to streamline the storage of blood, bone, allograft and tissue bank materials. For tissue, bone, blood and allograft organizations, the integrity and handling of each sample is critical. Drawing upon over 25 years experience of supplying sample storage and management solutions to pharmaceutical, biobanking and forensic labs worldwide - Micronic have developed a traceable sample storage system for donor organizations and tissue banks...
Micronic has announced a new version 4.6 of its popular Track-ITTM information management system. Track-IT is a unique out-of-the-box LIMS/LIS solution made for scientists enabling you to reorganize and track your tubes and samples in just minutes. Fully compatible with most commercial barcode readers, scanners and Tubesorter systems - Track-IT allows you to catalogue and organise samples quickly and efficiently...
The 0.5ml V-Bottom Cryotube from Micronic Europe enables Automated Biobanking and Cryobanking facilities to securely store low volume samples at temperatures below minus 80°C. The internal V-shape of the 0.5ml Cryotube provides the lowest possible dead volume and maximum recovery of scarce samples. In addition the short profile of the 0.5ml Cryotube enables automated storage facilities to use up to 50% less space compared to storage in traditional tube designs...
Available from Micronic Europe - the Pattern range of microplate adhesive sealing films has been designed to eliminate clogging and contamination of autosampler needles, maintain high sample integrity and provide the best barrier film for a wide variety of diagnostic and life science sample storage applications...
Micronic Europe has announced a new 1.4ml amber polypropylene storage tube that, used in conjunction with a secure screw cap, ensures the integrity of light sensitive biological samples even over long-term storage periods.
Micronic has introduced a next generation version of its popular Roborack 96-position sample tube storage rack. Traditionally users have used adhesive paper labels on their storage racks to provide sample traceability. However over a period of time, subject to repeated freeze thaw cycles and organic solvents which samples are often dissolved in, paper labels commonly degrade or fall off.