Follow us on
Search News Archives
Conferences | Events
Lab Bulletin Media Partners
BioTool AG

BioTool AG

BioTool AG

Products

Contact BioTool AG


If you have not logged into the website then please enter your details below.

All articles from BioTool AG

  Introducing the New Mespresso Micro Media Preparator from BioTool Swiss

Culture media in minutes

MespressoIn the Mespresso autoclave, the thermal energy required for sterilization is supplied directly to the medium. Microwaves are used as the energy source, so that heating of the medium is immediate and uniform. In comparison with the traditional steam autoclave, sterilization takes 5 times less time...

 

  LABFLAME AERO - A new Airflow Flame Solution available from BioTool Swiss

Ideal for use in biosafety cabinets

LabFlameThe new LabFlame Aero is designed to enhance the flame sterilization under air dynamic conditions. While standard safety burners fight with flames dancing against the air stream, with the risk of incomplete sterilization based on deviated flames, LabFlame aero can flame with the stream and offers an improved sturdy flame shape...

 

  TubeFiller from BIOTOOL AG

Made by microbiologists for microbiologists!

Biotool Tube fillerTubeFiller was designed to reduce repetitive manual filling of any format laboratory racked tubes. Based on its dedicated function to fill “any tubes in any rack” the design includes a very stable filling arm with 2 side rails for best position recovery, precise XY position axes, an easy manually adjustable height and an integrated pump to cover the standard microbiology filling range....

 

  New TubeFiller from BIOTOOL

Tube filling - rapid and easy

biotoolTubeFiller was designed to reduce repetitive manual filling of any format laboratory racked tubes. Based on its dedicated function to fill “any tubes in any rack” the design includes a very stable filling arm with 2 side rails for best position recovery, precise XY position axes, an easy manual height adjustment, and an integrated pump to cover the standard microbiology filling range. No need for an additional pump for standard applications.

 

  High-Speed Annealing and Sterilizing the Smart Way

Infrared Loop Sterilizer - using IR-HotSpot Technology

biotoolAre you looking for a fast, efficient and flameless product to anneal or sterilize your inoculation loops and delicate micro instruments? Then our electrical GlowZone Etna should be your first choice. Specifically focused infrared light generates an IR-HotSpot in which your inoculation loop is sterilized at temperatures from 750 to 1000°C after only 5 to 10 seconds. The GlowZone Etna just needs to be plugged in and will be immediately ready to use, without any unnecessary warm-up period....

 

  BioTool's DosiPump DP1000 - Now Offers Optimal Body Surface for Microbiology and Food Laboratories Biotool DosiPump DP1000All DosiPump DP1000 models are now supplied in fully welded stainless steel housings. The pump is splash water resistant (IP64 standard) and therefore easy to clean and optimal for media kitchens. 8 different tube calibrations allow a fast start of any operation; [select tube] [select program] [start]...

 

  Biotool AG have announced the introduction of the LabFlame IR – a Safety Enhanced Laboratory Gas Burner The new LabFlame IR is optimized for the use in microbiology laboratories. Its stainless steel housing is made of one piece, free of any gaps or rims and therefore easy to clean and fully UV resistant.

 

  Biotool AG have announced the introduction of the FlexiFuge The FlexiFuge mini centrifuge is a reasonably priced benchtop centrifuge that is ideal for quick spin downs from the walls of tubes, microfiltration of HPLC samples, and cell separations.