Members Login
Channels
Special Offers & Promotions
Your Laboratory Samples
IVS-1203 Personal Incubators from IKS International (Rosmalen, the Netherlands) are small and low cost, so individual laboratory workers can store their samples at their workplace, under personally selected conditions. These novel incubators are also small enough to be easily accommodated in laminar flow cabinets and other situations where a conventional incubator might be too large.
There are two models, both with a capacity of 9 litres and measuring only 290 x 345 x 370mm. The IVS-1203PS has a temperature range from Ambient + 5 ºC to 45 ºC. The cooled version, the IVS-1203P1S is uniquely small for a cooled incubator and has a range from 10 ºC to 45 ºC. Forced air circulation ensures even temperature distribution, and digitally set and displayed Peltier-effect heating and cooling give accurate temperature control (± 0.2 ºC).
These incubators are lightweight (only 4.2 Kg) for ease of handling and are ruggedly constructed, largely from ABS plastic. A height-adjustable polycarbonate sample tray is supplied with each unit.
These units are popular in IVF, medical and pharmaceutical laboratories where traceability and validation are very important, so if required a temperature sensor port gives full access to IKS’ Xiltrix® laboratory monitoring, recording and alarm system.
For more information, or to contact your local supplier, contact IKS International on +31(0)73 52 12 229, e-mail Info@iksbv.nl or visit www.xiltrix.com
There are two models, both with a capacity of 9 litres and measuring only 290 x 345 x 370mm. The IVS-1203PS has a temperature range from Ambient + 5 ºC to 45 ºC. The cooled version, the IVS-1203P1S is uniquely small for a cooled incubator and has a range from 10 ºC to 45 ºC. Forced air circulation ensures even temperature distribution, and digitally set and displayed Peltier-effect heating and cooling give accurate temperature control (± 0.2 ºC).
These incubators are lightweight (only 4.2 Kg) for ease of handling and are ruggedly constructed, largely from ABS plastic. A height-adjustable polycarbonate sample tray is supplied with each unit.
These units are popular in IVF, medical and pharmaceutical laboratories where traceability and validation are very important, so if required a temperature sensor port gives full access to IKS’ Xiltrix® laboratory monitoring, recording and alarm system.
For more information, or to contact your local supplier, contact IKS International on +31(0)73 52 12 229, e-mail Info@iksbv.nl or visit www.xiltrix.com
Media Partners