Endecotts
test sieves not only look
good but are designed and manufactured to offer qualities that make them
extremely precise and accurate whilst offering good handling, nesting and
strength.
Each
sieve is individually made
under the most stringent quality control procedures using only the finest
materials. The wirecloth is checked at every stage of manufacture either by
optical projection or highly sophisticated computer scanning techniques. The
final inspection is a precision measurement of apertures, and sieve frame
dimensions. Only
when we are satisfied it meets our exact standards do we give it an
Endecotts Certificate of Conformity
certifying that the sieve complies to the ISO 3310 / ASTM E 11 or other
International specifications.
Whether
it's standard Test Sieve or something special for industries such as diamond,
coffee or agriculture you'll find the same meticulous quality in design and
manufacture.
Endecotts
sieves are supplied in complete range of aperture sizes, diameter sizes, depths,
choice of materials and certified degrees of inspection to meet virtually every
requirement.
WET WASHING
SIEVES
Wet washing
sieves are extremely useful sieves where samples need to be separated with the
help of wet washing. Available in 8 inch diameter by 4 or 8 inches deep or
their metric equivalent with brass or stainless steel frames. A complete range
of aperture sizes with optional support medium for fine mesh.
MICROPLATE
SIEVES
Endecotts microplate sieves are made from
electro-formed nickel plate in stainless steel frames of 100mm or 200mm
diameter. Available with unique self-clearing apertures sizes from 75 to 5
microns. Microplate sieves are supplied with either round or square holes.
AIR-JET SIEVES
These sieves are specifically designed for use with air jet systems and
are available in 200 mm diameter brass or stainless steel frames and an
extensive range of aperture sizes.
EXTRA DEPTH SIEVES
Extensively used by the construction and cement
industries. These Extra depth sieves are available with a diameter size of 450
mm and a depth of 300 mm. Made from stainless steel with woven wire mesh or
perforated plate sieving mediums.
HALF HEIGHT SIEVES
Where
smaller quantities of sample are being analysed half height sieves are often
used.
These sieves are available in diameters of 100, 200 or 300mm and 3, 8 or 12
inches with the complete range of woven wire mesh or perforated plate sieving
media.
COFFEE SIEVES
These sieves
are specially designed for the coffee industry - and used for grading coffee
beans.
They are manufactured with brass or stainless steel frames of 8"/200 mm
and fitted with round hole, stainless steel perforated plate.
A complete range is available based on the '64th in.' standard measurements.
GRAIN SIEVES
Grain
Sieves, specially manufactured to meet the requirements of ISO 5223. They are
also used by Government Intervention Boards and similar organisations worldwide
for testing grains and cereals.
Available in 200 mm diameter brass or stainless steel frames in full or half
height depths with mild or stainless steel slotted plate.
For further information on
Endecotts products please email:
sales@endecotts.com, telephone: +44 (0) 208 542 8121 or visit
www.endecotts.com
Subscribe to any of our newsletters for the latest on new laboratory products, industry news, case studies and much more!
Request your free copies HERE
Popular this Month
Top 10 most popular articles this month
Today's Picks
Looking for a Supplier?
Search by company or by product
Please note Lab Bulletin does not sell, supply any of the products featured on this website. If you have an enquiry, please use the contact form below the article or company profile and we will send your request to the supplier so that they can contact you directly.
Lab Bulletin is published by newleaf marketing communications ltd.