Stuart rotator keeps statutory fertiliser analysis work turning over

Bibby Stuart STR4 RotatorKent Scientific Services, a Public Analyst Laboratory, selected a Stuart STR4 rotator to meet the requirements of its fertiliser enforcement analysis work. The prescribed analysis methods for checking the nitrogen and phosphorus content in fertiliser samples require flasks to be mixed end-over-end at 35-40rpm, faster than many other rotators can achieve.

Nitrogen (N), Phosphorus (P) and Potassium (K) are the three primary nutrients needed in large quantities by plants. Manufactured fertilisers, used to supply crops with nutrients the soil lacks, have to be labelled with three figures indicating their NPK content. The Fertilisers (Sampling and Analysis) Regulations 1996 require the figures to be checked by standardised analysis techniques. Kent Scientific Services, one of 18 Public Analyst Laboratories in England, provides scientific and calibration services for local authority enforcement agencies, including analysis of fertiliser samples collected by local Trading Standards officers from manufacturers' premises or at the point of sale.

David Heath, Quality Manager/Toxicology Manager at Kent Scientific Services, commented on the role played by the Stuart STR4 rotator in the laboratory's fertiliser analysis work: ‘When our old rotator broke down we needed to find a new one capable of providing the rotation speed specified by the regulations. The prescribed analysis methods for soluble N and P require fertiliser samples to be mixed with 400ml of water in a volumetric flask and mixed by end-over-end rotation at 35-40rpm. The speed we needed was well within the range offered by the STR4. The Bibby Scientific engineering department were very helpful to us, adjusting the bracket on the rotator so that it would work with the large 500ml flasks we need to use. They also extended the length of the bar so that we can mix four rather than two 500ml flasks at once, enabling a control to be processed alongside three samples. 

The STR4 incorporates a useful timer, which we set in order to mix the fertiliser samples for precisely 30 minutes, as specified in the regulations.'

The Stuart STR4 drive unit is highly versatile, accepting a choice of five drums designed to take test-tube holders, plates, racks of microcentrifuge tubes, conical flasks, reagent bottles, or jars and paint tins up to 200mm in length and 120mm diameter. The rotation speed is variable from 6 to 60rpm for a range of mixing applications, and the unit can be run in continuous operation mode or with the analogue timer set for 10 to 60 minutes.

For further information please visit www.stuart-equipment.com


If you have not logged into the website then please enter your details below.



 

Subscribe to any of our newsletters for the latest on new laboratory products, industry news, case studies and much more!

Newsletters from Lab Bulletin

 

Request your free copies HERE

 

 

 

Popular this Month

Top 10 most popular articles this month

 

 

Today's Picks

 


 

Looking for a Supplier?

Search by company or by product

 


Company Name:

Product:


 

 

 

 

Please note Lab Bulletin does not sell, supply any of the products featured on this website. If you have an enquiry, please use the contact form below the article or company profile and we will send your request to the supplier so that they can contact you directly.

Lab Bulletin is published by newleaf marketing communications ltd.